Consigli Tecnici

LRP Tyre Guide – VTEC pre-glued tyres for 1:8 & 1:10

28.05.2024
You are looking for a suitable tyre for your 1:8 or 1:10 model – as replacement or tuning? Then this tyre guide will help a lot. We’ve got you covered for every purpose.

S10 Twister Metal Gear Set

28.05.2024
LRP offers an optional metal gear set for the S10 Twister models that is recommended, when stronger motors are used. This tech tip includes a “step by step” instruction of the assembly.

S10 Twister – Setup and maintenance of the slipper!

28.05.2024
Maximum traction also on rough surfaces can be reached by perfectly adjusting the sliding clutch (slipper). This LRP Tech Tip explains how the adjustment of the slipper works in detail!

LRP S10 Blast 2 – the evolution of the bestsellers!

28.05.2024
The new versions of the S10 Blast models have been revised, optimised and improved in many details. Below, you’ll find the 13 most important evolutions.

LRP Car Line Tuning Shocks

28.05.2024
Many RTR models come with stiff plastic shocks that have been manufactured at a low price. These shocks don’t work flawlessly. Optional tuning shocks will help to resolve this problem.

S10 Twister Tuning – Aluminium Suspension Arm Holder Rear!

28.05.2024
Pimp your S10 Twister Buggy, Truggy or Short Course with the optional Aluminium Suspension Arm Holder for the rear axle!

S10 Blast: Correct setup and maintenance of the slipper!

28.05.2024
Maximum traction also on rough surfaces can be reached by perfectly adjusting the sliding clutch (slipper). How does the adjustment of the slipper work in detail?

S10 Twister SC: Securing the dogbones

28.05.2024
Increase the reliability of your S10 Twister Short Course truck quickly and easily.

S10 Blast 2 Brushless – Additional cooling of the K7 motor

28.05.2024
Cool down and enjoy even more driving fun with your LRP S10 Blast 2 Brushless car!

Motor Fastening Screws S10 Twister / S10 Blast

28.05.2024
Make your S10 Twister or S10 Blast even more offroad capable! Prevent the motor from slipping out of position with the optional button head hex screws!